具体规格 / G209
来源所述制造商: 青岛中和重工Qingdao Zhonghe Heavy Industries Co., Ltd.中文编辑简称；法定名称未核验。
来源数值须结合所述单位、配置与载荷条件使用。此页面不构成价格、库存或额定性能的确认。
可通过来源链接查看原始图片或图纸。公开转载许可尚未确认。
公开转载：未确认制造商 G209 系列资料。照片为系列图片；示意图需与所选公称尺寸行一同使用。两者均不能证明已经取得订单适用且带批准版次的图纸。
Zhonghe G209 range photograph
The manufacturer’s G209 range. The photograph is a range image; the diagram is used with the selected nominal-size row. Neither establishes a revision-approved drawing for an order.
制造商 G209 系列资料。照片为系列图片；示意图需与所选公称尺寸行一同使用。两者均不能证明已经取得订单适用且带批准版次的图纸。
Zhonghe G209 dimension diagram
The manufacturer’s G209 range. The photograph is a range image; the diagram is used with the selected nominal-size row. Neither establishes a revision-approved drawing for an order.
表格可左右滑动，查看全部列及适用条件。
| 参数 | 来源数值 | 适用条件／说明 |
|---|---|---|
| 工作载荷限制／来源标注 | Source text: 42.5 T | 大写 T 为来源原始标注。吨制及适用加载条件待确认，不进行单位换算。来源原文（English）Capital T is the original source label. Tonne basis and applicable loading conditions require confirmation; no unit conversion is applied. |
| 质量 | 29 kg | 见共同适用条件 1 |
| 公称尺寸 | 2 1/4" | 见共同适用条件 1 |
| 来源公差说明 | ±5% | 见共同适用条件 1 |
表格可左右滑动，查看全部列及适用条件。
| 尺寸符号 | 来源数值（mm） |
|---|---|
| A | 95 |
| B | 63 |
| C | 382 |
| D | 57 |
| E | 160 |
| F | 143 |
| H | 209 |
| L | 274 |
| G | 295 |
Manufacturer dimensional reference — G209 / 2 1/4"
Manufacturer’s dimensional reference for this nominal size, from the same G209 table. The table explicitly labels dimension columns in mm. No numbered, revision-approved drawing or order-specific tolerance and acceptance plan is established. The original ±5% note is not treated as an approved acceptance criterion.
来源记录日期: 2026-10-16
原有来源记录 →来源数值须结合所述单位、配置与载荷条件使用。此页面不构成价格、库存或额定性能的确认。
已有 G209 原始规格行及九个字母标注尺寸。尺寸脚注明确单位为 mm；目录数值不能确定订单公差，也不能替代经批准并标明修订版次的图纸。
Manufacturer catalogue and dimensional table
The original G209 size row and nine lettered dimensions are available. The dimension footnote states mm; catalogue values do not establish order tolerances or a revision-approved drawing.
可查看制造商原始示意图。该资料属于系列参考，未注明图号或修订版次，不能证明所选尺寸或批次检验结果。
Official G209 series diagram
An original manufacturer diagram is available for viewing. It is a series reference without a drawing number or revision; it is not proof of the selected size or a batch inspection.
制造商原始来源中有 G209 系列图片；该图片未识别所选尺寸或实际交付产品，公开转载许可尚未确认。
Manufacturer series image
A manufacturer G209 series image is available at the official source; the image does not identify the selected size or delivered unit. Public reproduction permission has not been established.
来源列使用大写 T，但未定义吨制或适用加载方式。保留原数值及 T 标注；比较或换算前须取得供应商对其含义的确认。
WLL unit and loading conditions
The source column uses capital T without defining the tonne basis or applicable loading arrangement. Keep the original number and T label; obtain the supplier definition before comparison or conversion.
索取拟议订单所接受的图号、修订版次、公称尺寸、材料／表面处理及尺寸公差。
Numbered drawing and tolerances
Request the drawing number, revision, nominal size, material/finish and dimensional tolerances accepted for the proposed order.
索取可识别产品的照片，以及买方要求并关联到产品／批次的材质、验证载荷与检验文件。来源声称可提供文件，不代表已经收到原件。
Selected-unit photo and batch test documents
Request an identified photo and the product/batch-linked material, proof-load and inspection documents required by the buyer. Source statements that documents can be supplied do not constitute received originals.
Reviewed source reference
来源所述制造商
公司及型号身份来自所链接来源的陈述。实际订单的制造商、销售方与签约主体责任仍需明确约定。
询价时附上本规格链接、数量与使用条件。
就本规格发起询价 →